First, remove the nut and top washers and install the cymbal to the machine.
Note: If the cymbal comes loose, it won’t come off but it may loosen enough for you to tell during the cleaning process. Simply turn the machine off, stop the cymbal from spinning and retighten securely before resuming the cleaning process.
Should this occur, it is usually for the following reasons:
2) The cymbal is warped and forces the nut to loosen.
Once the cymbal is securely tightened onto the cymbal cleaning machine you can now turn on the power.
Next, slowly turn up the voltage regulator to start the cymbal spinning, adjust speed accordingly.
Continuous cleaning of warped cymbals can be dangerous and can cause the warrantee of your machine to be voided.
Posted in: Instructions